• Tipping capacity of 1000 kg
• Tipping height 1500 mm with an angle of tilt 35°
• High-quality hydraulic package
• Robust construction made entirely of stainless steel
• Hygienic design according to EU hygiene norms

The machine is designed for safe and easy unloading of various products used in meat and other food industries. Tipping height: 1500mm. The holders are adjustable in 5 steps of 50 mm each, depending on the height of the container. Tipping angle: 35°. Maximum load 1000 kg in a container with maximum dimensions 1200 x 1000 x 850 mm. Mobile version. The wheels can be locked stationary. Hygienic design according to EU hygiene standards. The container can be tipped out via the 850 mm side. Left hand operating panel. The swing loader is equipped with a high-quality hydraulic pack and motor. Stainless steel cylinder. Extra strong execution, completely made of stainless steel, material no. 1.4301. 
Options: Safety fence, fork for 200/300l buggy.

Technical  Data:
Lifting capacity:1000 kg
Discharge height: 1500 ± 20 mm
Discharge angle: 32±3⁰
Container [L x B x H]:1200 x 1000 x 850  mm
Lifting time: 20 sec.
Power supply: 400 V 50 Hz 
Control voltage: 24 V DC                           
Power consumption: 1,6 kW
Motor IP rating: 65 IP                                            
Ambient temperature: 4 °C ÷ 30 °C           
Machine dimensions: 1618 x 1908 x 1906  mm   
Machine weight: approx. 600 kg

• Adjustable transport speed according to the pollution level
• Hygienic design according to EU hygiene norms
• Adjustable nozzles for proper washing result
• Rinsing with 85 °C ensures disinfection of the crates
• Removable side covers for easy cleaning and maintaining

Available machine capacities:
• 70-100 pcs/h on side 400mm, 120 - 150 pcs/h on side 600mm
• 150-250 pcs/h on side 400mm; 160 -320 pcs/h on side 600mm
• 400-600 pcs/h on side 400mm; 600 - 800 pcs/h on side 600mm
• Capacities above 800 pcs/h are available on request.

The machine is designed for washing and rinsing EURO crates - E1, E2, and E3. It is equipped with fixed nozzles for rinsing and adjustable nozzles for the washing process. Heating of water in the tank: direct steam injection. Electric heating is also an option. Pneumovalve for steam control. The 85°C hot water for rinsing is supplied via the steam/water mixing valve. The water of the washing process is continuously filtered and replenished from the rinsing process, which provides reduced water and energy consumption. The temperature of the wash water can be adjusted from 30 °C to 60 °C via a thermostat. The water tank is thermally insulated to prevent heat loss. The tunnel is equipped with removable side covers that facilitate easy cleaning and maintenance. Safety features include magnetic sensors on the side covers, overload clutch coupling, and electronic regulation of the water level.  

Options:
• One-man operational system
• Dosing pump for detergent 
• Adjustable side guide according to 300-600mm in width
• Blow-off module 2 x 3kW  fans
• Fan 1.1 kW for exhausting of the vapour
• External water heater 15 kW, 50-85 ° C  (rinsing process)  
• External water heater 30 kW, 20-85 ° C  (rinsing process)
• Washing with 4 kW pump, instead of 3 kW 
• Washing with 3 kW pump, instead of 1.5 kW
• Siemens PLC S7-1200 and display KP300

Standard dimensions of Euro crates:
Euro 1 (E1) standard - 600 x 400 x 125 mm
Euro 2 (E2) standard  - 600 x 400 x 200 mm
Euro 2 (E3) standard  - 600 x 400 x 300 mm  

Washing and rinsing of EURO-pallets with size 1200x800x160 mm. Manually adding the detergent into the main washing tank. An automatic dosing pump is an option. Electrical heating. Steam heating is an option. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Re­quire­ments and EU- and USDA regulations.

Technical Data:

• Power supply: 400 V 50 Hz
• Control Voltage: 24 V AC
• Power consumption: 44 kW
• Water line pressure: min 3 bar – max 5 bar
• Electrical heating: 3 x 12 kW
• Water inlet: R 1” /cold water/
• Water inlet: R 1/2” /warm water/
• Water outlet: R 2”
• Capacity: up to 150 pcs / h
• Machine weight:  approx. 600 kg
• Machine dimensions: 3930 x 1000 x 1656 mm
• Pallet dimensions: 4100 x 1200 x 2000 mm

• Ergonomic and safe material handling in the food industry
• Robust construction, made of stainless steel
• Safety devices, including upper and lower limit switches
• Hygienic design according to EU hygiene norms
• Mechanical and electrical safety brakes 
• Safety switching scheme Hold-to-run (Dead man)

The emptying of the buggy takes place over its narrow side. Gear motor equipped with an electrical brake. Safety switch (Dead man) stops the machine if no operator. A safety mechanical brake prevents the fork from falling in case of a chain break. Chain drive. Body of stainless steel,   material  EN 1.4301 / AISI 304. Food-approved lubricants. The machine complies with the high CE-Requirements and EU- and USDA regulations. 

Standard options:

• 90° Fork - available for stationary execution;
• Safety cage;
• Mobile frame  (increases the height by 35mm);
• Chute.

Options upon request:

• Mobile on a rail for loading tumblers;
• Non-standard discharge heights.

Available discharge height:  

• 870 mm – 1470 mm  - (5 х 120 mm adjustable) Art. 2447100 - left execution, Art. 2446100 - right execution
• 1620 mm – 2220 mm - (5 х 120 mm adjustable) Art. 2447101 - left execution, Art. 2446101 - right execution
• 2370 mm – 2970 mm - (5 х 120 mm adjustable) Art. 2447102 - left execution, Art. 2446102 - right execution
• 3120 mm – 3720 mm - (5 х 120 mm adjustable) Art. 2447103 - left execution, Art. 2446103 - right execution
• Single column lifter with discharge height over 3720 mm upon request! 

Technical  Data:

• Lifting capacity: 300 kg 
• Discharge angle: 45±3⁰
• Container: 200 or 300l meat bin
• Lifting time: approx. 5 m / min
• Power supply: 400 V 50 Hz 
• Control voltage: 24 V DC                           
• Power consumption: 9 kW
• Motor IP rating: 65 IP  
• Lifting principle: via roller chain                                       
• Ambient temperature: 4 °C ÷ 30 °C

• Tipping capacity of 1000 kg
• Tipping height 1500 mm with an angle of tilt 35°
• High-quality hydraulic package
• Robust construction made entirely of stainless steel
• Hygienic design according to EU hygiene norms

The machine is designed for safe and easy unloading of various products used in meat and other food industries. Tipping height: 1500mm. The holders are adjustable in 5 steps of 50 mm each, depending on the height of the container. Tipping angle: 35°. Maximum load 1000 kg in a container with maximum dimensions 1200 x 1000 x 850 mm. Mobile version. The wheels can be locked stationary. Hygienic design according to EU hygiene standards. The container can be tipped out via the 850 mm side. Left hand operating panel. The swing loader is equipped with a high-quality hydraulic pack and motor. Stainless steel cylinder. Extra strong execution, completely made of stainless steel, material no. 1.4301. 
Options: Safety fence, fork for 200/300l buggy.

Technical  Data:
Lifting capacity:1000 kg
Discharge height: 1500 ± 20 mm
Discharge angle: 32±3⁰
Container [L x B x H]:1200 x 1000 x 850  mm
Lifting time: 20 sec.
Power supply: 400 V 50 Hz 
Control voltage: 24 V DC                           
Power consumption: 1,6 kW
Motor IP rating: 65 IP                                            
Ambient temperature: 4 °C ÷ 30 °C           
Machine dimensions: 1618 x 1908 x 1906  mm   
Machine weight: approx. 600 kg

• Adjustable transport speed according to the pollution level
• Hygienic design according to EU hygiene norms
• Adjustable nozzles for proper washing result
• Rinsing with 85 °C ensures disinfection of the crates
• Removable side covers for easy cleaning and maintaining

Available machine capacities:
• 70-100 pcs/h on side 400mm, 120 - 150 pcs/h on side 600mm
• 150-250 pcs/h on side 400mm; 160 -320 pcs/h on side 600mm
• 400-600 pcs/h on side 400mm; 600 - 800 pcs/h on side 600mm
• Capacities above 800 pcs/h are available on request.

The machine is designed for washing and rinsing EURO crates - E1, E2, and E3. It is equipped with fixed nozzles for rinsing and adjustable nozzles for the washing process. Heating of water in the tank: direct steam injection. Electric heating is also an option. Pneumovalve for steam control. The 85°C hot water for rinsing is supplied via the steam/water mixing valve. The water of the washing process is continuously filtered and replenished from the rinsing process, which provides reduced water and energy consumption. The temperature of the wash water can be adjusted from 30 °C to 60 °C via a thermostat. The water tank is thermally insulated to prevent heat loss. The tunnel is equipped with removable side covers that facilitate easy cleaning and maintenance. Safety features include magnetic sensors on the side covers, overload clutch coupling, and electronic regulation of the water level.  

Options:
• One-man operational system
• Dosing pump for detergent 
• Adjustable side guide according to 300-600mm in width
• Blow-off module 2 x 3kW  fans
• Fan 1.1 kW for exhausting of the vapour
• External water heater 15 kW, 50-85 ° C  (rinsing process)  
• External water heater 30 kW, 20-85 ° C  (rinsing process)
• Washing with 4 kW pump, instead of 3 kW 
• Washing with 3 kW pump, instead of 1.5 kW
• Siemens PLC S7-1200 and display KP300

Standard dimensions of Euro crates:
Euro 1 (E1) standard - 600 x 400 x 125 mm
Euro 2 (E2) standard  - 600 x 400 x 200 mm
Euro 2 (E3) standard  - 600 x 400 x 300 mm  

Washing and rinsing of EURO-pallets with size 1200x800x160 mm. Manually adding the detergent into the main washing tank. An automatic dosing pump is an option. Electrical heating. Steam heating is an option. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Re­quire­ments and EU- and USDA regulations.

Technical Data:

• Power supply: 400 V 50 Hz
• Control Voltage: 24 V AC
• Power consumption: 44 kW
• Water line pressure: min 3 bar – max 5 bar
• Electrical heating: 3 x 12 kW
• Water inlet: R 1” /cold water/
• Water inlet: R 1/2” /warm water/
• Water outlet: R 2”
• Capacity: up to 150 pcs / h
• Machine weight:  approx. 600 kg
• Machine dimensions: 3930 x 1000 x 1656 mm
• Pallet dimensions: 4100 x 1200 x 2000 mm