The PowerHeater™ creates a meat-identical texture from plant-based and meat proteins. The result is a ready-to-eat, high-quality product that tastes, looks, and feels like meat.

• Unique fibrous products with great taste and bite
• Versatile processing of meat, plant-based, seafood, myco, and hybrid proteins
• Create delicious high-quality food or super-premium pet food
• End products have a natural and attractive look
• No cooking losses = 99.5% output.
• Documented target cooking temperature (controlled bacterial elimination)
• Continuous process, with fast product change and system cleaning
• Low operating costs
• Low energy consumption

What are the PowerHeater™ 100-3 features?

With the PowerHeater™ 100-3, you get high capacity output of premium fibrous product from which flexible categories of protein.

• Size: 3.9 x 3.3 x 2.8 meters / 152 x 132 x 110 inches
• Capacity: 720 kg/hr. - 2650 lbs./hr.(depending on the recipe)
• Continuous production with our trusted Service Level Agreements (SLA)

The FlexiCut™ can cut hot products directly from any PowerHeater™ model. The patented technology is ideal for processing fibrous products into various sizes like cubes, chunks, or strips for various food or pet food products.

The adjustable cutting helps change product characteristics during the cutting process. Compared with other cutting systems, the FlexiCut™ does not require long setup times for specific product sizes. Changes take effect within seconds.

What are the FlexiCut™ features?

Our high capacity in-line FlexiCut™ technology gives multiple product sizing possibilities.

• Size: 1.5 x 1.7 x 1.8 meters / 61 x 67 x 69 inches
• Capacity: being a unique in-line cutter, the FlexiCut™ follows all capacities of any PowerHeater™ model seamlessly
• Cutting frequency: 6-1000 cuts per minute
• Continuous production with our trusted Service Level Agreements (SLA)

With the BDS™ in your dry goods production line, you add valuable, cost-saving, and fully automatic analysis.

The BDS™ primarily measures the actual bulk density in all kinds of dry products. The dry product can be both hot or cold and for example pelleted, extruded, or powdered products. The BDS™ is placed at key stages of your production line, where the fully automatic technology eliminates manual resources for sampling and measuring. The analyzed product stays untouched and can be returned to your product flow. This way you avoid wasting product.

With a high frequency of analysis every minute, you can eliminate weight inconsistency problems. Your product weight stays under control all the way to the end of the line, eliminating over- or under-filled bags.

The high-frequency data also gives you superior control over your essential processing equipment’s ongoing performance, such as, for example, extruders. Detected variations can possibly mean mechanical failure.

The BDS™ can be fitted with a selection of secondary analyses:

• A moisture index module, that measures variations in the moisture percentage of the bulk product, which can prevent poor mouth-feel and packages with “clumped” products. The BDS™ gives you density and moisture analysis every minute.
• Visual product control is also a possibility with the addition of a camera sensor and collection of images for manual inspection. This enables sizing control.
• Finally, a temperature sensor can be installed. It can, for example, help you monitor significant temperature variations in your production line, which affects bulk density measurements. Or it can ensure that the product is cooled down and ready for packaging.

What are the Bulk Density System features?

The BDS™ measures the actual bulk density in the dry product, for both hot and cold extruded products.

• Size: 1.2 x 0.6 x 0.3 meters / 46 x 22 x 12 inches
• Frequency: Sampling and analysis are done a minimum of once a minute, and the data is collected in a CSV-file
• Analysis options: Bulk density, Moisture, Visual product control, and Temperature
• Continuous performance with our trusted Service Level Agreement (SLA)

The PowerHeater™ creates a meat-identical texture from plant-based and meat proteins. The result is a ready-to-eat, high-quality product that tastes, looks, and feels like meat.

• Unique fibrous products with great taste and bite
• Versatile processing of meat, plant-based, seafood, myco, and hybrid proteins
• Create delicious high-quality food or super-premium pet food
• End products have a natural and attractive look
• No cooking losses = 99.5% output.
• Documented target cooking temperature (controlled bacterial elimination)
• Continuous process, with fast product change and system cleaning
• Low operating costs
• Low energy consumption

What are the PowerHeater™ 100-5 features?

Get the highest capacity of our unique PowerHeater™ technology. With our largest unit Model PH100-5 you get the maximum product volume from a single unit.

• Size: 3.9 x 3.3 x 2.8 meters / 152 x 132 x 110 inches
• Capacity: 1200 kg/hr. - 2650 lbs./hr. (depending on the recipe)
• Continuous production with our trusted Service Level Agreements (SLA)

The PowerHeater™ creates a meat-identical texture from plant-based and meat proteins. The result is a ready-to-eat, high-quality product that tastes, looks, and feels like meat.

• Unique fibrous products with great taste and bite
• Versatile processing of meat, plant-based, seafood, myco, and hybrid proteins
• Create delicious high-quality food or super-premium pet food
• End products have a natural and attractive look
• No cooking losses = 99.5% output.
• Documented target cooking temperature (controlled bacterial elimination)
• Continuous process, with fast product change and system cleaning
• Low operating costs
• Low energy consumption

What are the PowerHeater™ 100-3 features?

With the PowerHeater™ 100-3, you get high capacity output of premium fibrous product from which flexible categories of protein.

• Size: 3.9 x 3.3 x 2.8 meters / 152 x 132 x 110 inches
• Capacity: 720 kg/hr. - 2650 lbs./hr.(depending on the recipe)
• Continuous production with our trusted Service Level Agreements (SLA)

The FlexiCut™ can cut hot products directly from any PowerHeater™ model. The patented technology is ideal for processing fibrous products into various sizes like cubes, chunks, or strips for various food or pet food products.

The adjustable cutting helps change product characteristics during the cutting process. Compared with other cutting systems, the FlexiCut™ does not require long setup times for specific product sizes. Changes take effect within seconds.

What are the FlexiCut™ features?

Our high capacity in-line FlexiCut™ technology gives multiple product sizing possibilities.

• Size: 1.5 x 1.7 x 1.8 meters / 61 x 67 x 69 inches
• Capacity: being a unique in-line cutter, the FlexiCut™ follows all capacities of any PowerHeater™ model seamlessly
• Cutting frequency: 6-1000 cuts per minute
• Continuous production with our trusted Service Level Agreements (SLA)

With the BDS™ in your dry goods production line, you add valuable, cost-saving, and fully automatic analysis.

The BDS™ primarily measures the actual bulk density in all kinds of dry products. The dry product can be both hot or cold and for example pelleted, extruded, or powdered products. The BDS™ is placed at key stages of your production line, where the fully automatic technology eliminates manual resources for sampling and measuring. The analyzed product stays untouched and can be returned to your product flow. This way you avoid wasting product.

With a high frequency of analysis every minute, you can eliminate weight inconsistency problems. Your product weight stays under control all the way to the end of the line, eliminating over- or under-filled bags.

The high-frequency data also gives you superior control over your essential processing equipment’s ongoing performance, such as, for example, extruders. Detected variations can possibly mean mechanical failure.

The BDS™ can be fitted with a selection of secondary analyses:

• A moisture index module, that measures variations in the moisture percentage of the bulk product, which can prevent poor mouth-feel and packages with “clumped” products. The BDS™ gives you density and moisture analysis every minute.
• Visual product control is also a possibility with the addition of a camera sensor and collection of images for manual inspection. This enables sizing control.
• Finally, a temperature sensor can be installed. It can, for example, help you monitor significant temperature variations in your production line, which affects bulk density measurements. Or it can ensure that the product is cooled down and ready for packaging.

What are the Bulk Density System features?

The BDS™ measures the actual bulk density in the dry product, for both hot and cold extruded products.

• Size: 1.2 x 0.6 x 0.3 meters / 46 x 22 x 12 inches
• Frequency: Sampling and analysis are done a minimum of once a minute, and the data is collected in a CSV-file
• Analysis options: Bulk density, Moisture, Visual product control, and Temperature
• Continuous performance with our trusted Service Level Agreement (SLA)