Advantages:

• Easy handling: Manual loading with gas pressure damper-supported pick-up carriage for energy-saving work.
• Efficient cleaning: Rotating nozzle ring and additional nozzle stick for internal cleaning.
• Thorough cleanliness: Cleaning of all sides, including chassis and wheel area.
• Hygienic rinsing: Rinsing takes place after the wash cycle for immediate use of the container.

Technical details:

• Robust, fully welded construction with solid frame
• Cleaning capacity: 10-15 trolleys per hour (200 l)
• 90° positioning enables complete cleaning
• Washing times adjustable via time relay and 2-step switch
• 600-liter wash tank for high dirt absorption
• High-quality stainless steel nozzles with large water passage
• Effective filter system to protect against coarse dirt
• 7.5 kW stainless steel centrifugal pump: 1000 l/min at 3 bar washing pressure

For quick and safety emptying of big plastic boxes

• Stationary version with height-adjustable stainless steel feet with flange
• Depending on the type, emptying takes place via the longitudal side or narrow side
• Holder suitable for containers up to max. L 1200 x W 1000 x H 800 mm
• Containers are fed in or loaded straight from the rear
• With lateral container infeed (right or left) including safety fence
• Tilting height optionally from 1000 mm to 1500 mm depending on type
• Electro-hydraulic drive with food-grade oil (attached at the bottom)
• Integrated chute for exact emptying, chute width: 800 mm
• Double-acting cylinder (AUF+AB controlled)
• Maximum load capacity 650 kg (including container) - optional 1000 kg possible

Description

The design is determined by the type and viscosity of the bulk material and, if necessary, extended by special chutes and hoppers. This means that the swing loaders can be adapted for almost any application.

Advantages

• Manufactured according to CE standard, EU-compliant
• Robust industrial design guarantees long service life
• Maintenance-free plastic bearings
  • No maintenance required
  • No need for lubricant
• Hose rupture safety valve
  • no uncontrolled lowering
  • increased safety

Effortlessly cleans up to 300 standard knife baskets per hour

• Completely double-walled, soundproof and heat insulated machine housing made of one piece and completely welded
• Nozzle arms can be removed and cleaned without any tools, forced positioning
• Round hole stainless steel nozzles with large passage, good cleaning effect and insensitive to pollution
• Passage width 130 mm per lane, max. passage height 485 mm, housing width 600 mm
• 1800 mm long active washing and rinsing zone
• Tank volume approx. 200 l with plate filter that can be removed via the maintenance door
• Electrical heating 10 kW or direct steam for washing tank
• Strong stainless steel centrifugal pump with 3 KW output, 600l/min circulation at 2 bar wash pressure, distributed on 40 stainless steel flat jet nozzles in easily removable nozzle arms
• Clear rinsing with fresh water, can be adjusted sensitively via pressure reducers
• Fresh water supply temperature approx. 45° C, recommended final rinse temperature 85 °C, heatable via electrical heater or steam, see options

Technical data

• Mains connection: 3~ 400 V - 50 Hz
• Power: 14 kW (with electric heater in the tank)
• Drain: DN 50
• Water connection: 3/4”, 1-6 bar min. 45°C
• Water consumption: 350-400 l/h
• Tank capacity: 200 ltr.
• Pump capacity: 3 kW - 600 l/min at 2 bar
• Heating capacity tank: 10 kW
• Tunnel dimensions: W 130 x H 485 mm
• Extraction: 1 x DN 250, 1500 m³/h at 500 Pa

Single-lane tunnel washer for cleaning different wash items

Key advantages of our Highline machines:

• Completely double-walled, sound- and heat-insulated machine housing, manufactured in one piece and completely welded, resulting in low energy consumption
• Long washing treatment and a nozzle and washing system that has been refined over the years to achieve excellent washing results
• Nozzle arms with stainless steel nozzles can be removed and cleaned without tools (forced positioning of nozzle arms)
• Nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling
• Powerful stainless steel circular pumps
• Tunnel flow with height adjustment by means of easily adjustable hold-down device suitable for Euronorm E1-E3, can be adapted for customer-specific wash items on request
• With electric tank heating as standard (main wash zone); optionally with steam directly or via heat exchanger system
• Tank volume depends on the filter system
• Blower module in different performance levels, depending on the desired blow-off result
• Use of first-class attachments from renowned manufacturers

Wash ware

• Small load carrier (KLT container) made of plastic, maximum width 600 x height 300 mm
• Euronorm container (E1-E3 container), maximum width 600 x height 300 mm
• Stainless steel trolleys with plastic wheels, maximum width 600 x height 300 mm
• GN containers up to max. 2/1
• Moulds, e.g. meat loaf moulds, maximum width 600 x height 300 mm
• Plastic baskets, maximum width 600 x height 300 mm

Advantages:

• Easy handling: Manual loading with gas pressure damper-supported pick-up carriage for energy-saving work.
• Efficient cleaning: Rotating nozzle ring and additional nozzle stick for internal cleaning.
• Thorough cleanliness: Cleaning of all sides, including chassis and wheel area.
• Hygienic rinsing: Rinsing takes place after the wash cycle for immediate use of the container.

Technical details:

• Robust, fully welded construction with solid frame
• Cleaning capacity: 10-15 trolleys per hour (200 l)
• 90° positioning enables complete cleaning
• Washing times adjustable via time relay and 2-step switch
• 600-liter wash tank for high dirt absorption
• High-quality stainless steel nozzles with large water passage
• Effective filter system to protect against coarse dirt
• 7.5 kW stainless steel centrifugal pump: 1000 l/min at 3 bar washing pressure

For quick and safety emptying of big plastic boxes

• Stationary version with height-adjustable stainless steel feet with flange
• Depending on the type, emptying takes place via the longitudal side or narrow side
• Holder suitable for containers up to max. L 1200 x W 1000 x H 800 mm
• Containers are fed in or loaded straight from the rear
• With lateral container infeed (right or left) including safety fence
• Tilting height optionally from 1000 mm to 1500 mm depending on type
• Electro-hydraulic drive with food-grade oil (attached at the bottom)
• Integrated chute for exact emptying, chute width: 800 mm
• Double-acting cylinder (AUF+AB controlled)
• Maximum load capacity 650 kg (including container) - optional 1000 kg possible

Description

The design is determined by the type and viscosity of the bulk material and, if necessary, extended by special chutes and hoppers. This means that the swing loaders can be adapted for almost any application.

Advantages

• Manufactured according to CE standard, EU-compliant
• Robust industrial design guarantees long service life
• Maintenance-free plastic bearings
  • No maintenance required
  • No need for lubricant
• Hose rupture safety valve
  • no uncontrolled lowering
  • increased safety

Effortlessly cleans up to 300 standard knife baskets per hour

• Completely double-walled, soundproof and heat insulated machine housing made of one piece and completely welded
• Nozzle arms can be removed and cleaned without any tools, forced positioning
• Round hole stainless steel nozzles with large passage, good cleaning effect and insensitive to pollution
• Passage width 130 mm per lane, max. passage height 485 mm, housing width 600 mm
• 1800 mm long active washing and rinsing zone
• Tank volume approx. 200 l with plate filter that can be removed via the maintenance door
• Electrical heating 10 kW or direct steam for washing tank
• Strong stainless steel centrifugal pump with 3 KW output, 600l/min circulation at 2 bar wash pressure, distributed on 40 stainless steel flat jet nozzles in easily removable nozzle arms
• Clear rinsing with fresh water, can be adjusted sensitively via pressure reducers
• Fresh water supply temperature approx. 45° C, recommended final rinse temperature 85 °C, heatable via electrical heater or steam, see options

Technical data

• Mains connection: 3~ 400 V - 50 Hz
• Power: 14 kW (with electric heater in the tank)
• Drain: DN 50
• Water connection: 3/4”, 1-6 bar min. 45°C
• Water consumption: 350-400 l/h
• Tank capacity: 200 ltr.
• Pump capacity: 3 kW - 600 l/min at 2 bar
• Heating capacity tank: 10 kW
• Tunnel dimensions: W 130 x H 485 mm
• Extraction: 1 x DN 250, 1500 m³/h at 500 Pa