Standard channels are made of stainless steel and they are used to drain water from the floor and discharge it to the sewerage. This type of drainage finds application in food processing plants (breweries, dairy plants, slaughterhouses), chemical plants, restaurants, hospitals etc. Standard channels are also used in the facilities, where the sanitary regulations and technological process require using stainless steel drainage systems.

The standard drainage channels are manufactured in a wide range of sizes and shapes. They are made “to order”; the custom-made drawing is prepared as a result of cooperation between the client, its design or process engineer and the ATT staff.

Standard channels are made of 2 mm thick, AISI 304 or AISI 316 sheets. The channels have in-built inclination.To facilitate installation, each channel is equipped with levelling feet and anchoring elements for correct height adjustment and placement in concrete.

The channels are covered with grating. Depending on the application and load, we offer anti slip mesh, ladder, perforated sheet or plate grating. As a standard, the sections longer than 4 metres are joined by means of flanges with gaskets. De- pending on customer preferences, the standard channels can be connected with other drainage components, such as floor drains or slot channels.

Products are made of stainless steel and they meet highest higienic requirements. They find applications in meat plants, food processing facilities, slaghterhouses, bakeries, industrial kitchens, restaurants. Wide range of products and offered dimensions and shapes allow to offer best solutions matching all clients requirements.

ATT stainless steel floor drains are used in all places where hygienic requirements, corrossion ressistance and durability play crucial role in selecting proper product.
Floor drains are made of austenitic stainless steel 1.4301 (AISI304) and 1.4404 (AISI 316L), they are produced according to norm PN-EN 1253.

We provide a wide range of floor drains:

TOP SIZES:

• square from 150x150 mm up to 400x400 mm
• round from D160 mm up to D300 mm

CONFIGURATION:

• single part
• adjustable top

GRATINGS: depending on the load class and water intake capacity: perforated, bar, mesh. plate

ACCESSORIES: water trap, filter basket, sediment bucket, strainer

OUTLET :

• directions: horizontal and vertical
• diameter sizes: D50, D75, D110, D160, D200 mm

We can offer three types of manhole covers:

• stainless steel manhole covers are made of the V2A steel and are 3 [mm] thick, which allows for installing them in areas where sanitary requirements are very strict.
• regular and gas-tight aluminium manhole covers which are more economical option.
• galvanized manhole covers.

ADVANTAGES

• easy access to systems installed under a surface,
• isolation from external odours,
• water tightness,
• easy opening,
• high durability,
• aesthetics.

Standard channels are made of stainless steel and they are used to drain water from the floor and discharge it to the sewerage. This type of drainage finds application in food processing plants (breweries, dairy plants, slaughterhouses), chemical plants, restaurants, hospitals etc. Standard channels are also used in the facilities, where the sanitary regulations and technological process require using stainless steel drainage systems.

The standard drainage channels are manufactured in a wide range of sizes and shapes. They are made “to order”; the custom-made drawing is prepared as a result of cooperation between the client, its design or process engineer and the ATT staff.

Standard channels are made of 2 mm thick, AISI 304 or AISI 316 sheets. The channels have in-built inclination.To facilitate installation, each channel is equipped with levelling feet and anchoring elements for correct height adjustment and placement in concrete.

The channels are covered with grating. Depending on the application and load, we offer anti slip mesh, ladder, perforated sheet or plate grating. As a standard, the sections longer than 4 metres are joined by means of flanges with gaskets. De- pending on customer preferences, the standard channels can be connected with other drainage components, such as floor drains or slot channels.

Products are made of stainless steel and they meet highest higienic requirements. They find applications in meat plants, food processing facilities, slaghterhouses, bakeries, industrial kitchens, restaurants. Wide range of products and offered dimensions and shapes allow to offer best solutions matching all clients requirements.

ATT stainless steel floor drains are used in all places where hygienic requirements, corrossion ressistance and durability play crucial role in selecting proper product.
Floor drains are made of austenitic stainless steel 1.4301 (AISI304) and 1.4404 (AISI 316L), they are produced according to norm PN-EN 1253.

We provide a wide range of floor drains:

TOP SIZES:

• square from 150x150 mm up to 400x400 mm
• round from D160 mm up to D300 mm

CONFIGURATION:

• single part
• adjustable top

GRATINGS: depending on the load class and water intake capacity: perforated, bar, mesh. plate

ACCESSORIES: water trap, filter basket, sediment bucket, strainer

OUTLET :

• directions: horizontal and vertical
• diameter sizes: D50, D75, D110, D160, D200 mm