Made of either polyurethane or elastomer polyester, monomaterial conveyor belts are intended for various industrial handling applications.

Their advantages provide an optimal solution for many industries:

• Ease of use: easy and fast on-site welding without the dismantling of machinery.
• Durability: Highly resistant to tearing, splitting, wear, cuts, abrasion…
• Complete compliance: waterproof and rot-resistant conveyor belts, compliant with the international standards

POSITIVEBELT positively driven conveyor belts offer exceptional tracking guidance thanks to the configuration of the double drive teeth which sit either side of each sprocket.

Compliant with the most stringent hygiene standards, POSITIVEBELT is optimised for use in food applications.

POSITIVEBELT’s perfectly smooth upper surface is easily cleaned and durable satisfying the most stringent of hygiene regimes.


POSITIVEBELT comes in a number of variants to meet different application demands:


POSITIVEBELT PO1 conveyor belts for applications requiring higher surface adhesion or small sprocket diameters.

This version can be reinforced with aramid fibers, creating higher load capacity, even on narrower widths.

A molded studded surface is also available by request.


POSITIVEBELT PO2 conveyor belts: The self-tracking positive drive

The double rows of teeth on the bottom (drive side) provide perfect belt tracking which eliminates the possibility of frayed edges and material contamination.

POSITIVEBELT has a high abrasion and cut resistance, ensuring prolonged service life.

POSITIVEBELT can be infused with an antimicrobial treatment to optimize hygiene levels.

This treatment is designed for food industry applications as it inhibits the propagation of bacteria, and consequently improves food safety. It also reduces the odours that are associated with bacterial presence.


The entire POSITIVEBELT range can be equipped with cleats and sidewalls to meet different application requirements.

Constructed in durable polyurethane or elastomer polyester, POSITIVEBELT conveyor belts have a smooth upper surface (or embossed on request).

POSITIVEBELT combines the advantages of modular belts and monomaterial conveyor belts. This allows the highest levels of hygiene possible from any conveyor belt yet eliminates the risk of slippage, even in greasy and humid environments.

The driving force is transmitted by sprockets mounted on square shaft, or alternatively on a drive drum fitted with drive rings. They can also be mounted on other shafts with special adapters.

The idler shaft is fitted with disks. Wheels can be added between sprockets and disks, appropriate to the loads transported.

POSITIVEBELT is fitted without tension. This reduces stress on conveyor’s mechanical components which results in a conveyor that lasts longer.

Positively driven conveyor belts combine the advantages of modular belts and monomaterial conveyor belts.

DEL/SYNC is a positively driven conveyor belt that combines the advantages of a conveyor belt and a timing belt. DEL/SYNC offers excellent guidance and allows a precise positioning of transported products.

The DEL/SYNC conveyor belt can be reinforced with aramid fibers that eliminate the elongation.

DEL/SYNC is produced as standard with a perfectly smooth, hygienic surface that facilitates easy and thorough cleaning.

The DEL/SYNC range of conveyor belts can be supplied in different variants that offer specific characteristics according to need. Such variations include reinforcements, surface embossing, hardnesses etc.

Custom shaped cleats can be fitted to the belt to ensure excellent location of transported products.

A molded studded surface is possible on request.

Constructed in durable polyurethane, DEL/SYNC conveyor belts have either a smooth upper surface, or a molded studded surface (on request).

DEL/SYNC synchronous positive drive conveyor belts, allow extremely precise movement of transported products. The aramid cord reinforced version has a very high resistance to elongation.

DEL/SYNC is compliant with the most stringent standards, and contributes to HACCP requirements.

DEL/DRIVE conveyor belts represent the perfect replacement in applications where modular belts cannot meet hygiene or plastic contamination standards. DEL/DRIVE easily replaces an existing modular belt with no modification to the conveyor except for a change of sprockets.

DEL/DRIVE is particularly suited for the food industry. DEL/DRIVE is compliant with the most stringent standards, and contributes to HACCP requirements.

The DEL/DRIVE range comprises a number of variants to meet every need:

DEL/DRIVE 50 conveyor belt: An ideal solution for the conveyance of light to medium-weight loads.

Produced in polyurethane, the positively driven DEL/DRIVE 50 is perfect for the conveyance of light to medium-weight loads. DEL/DRIVE 50 is both flexible yet longitudinally stable.

DEL/DRIVE 50AM: Conveyor belt with infused antimicrobial treatment.

The ‘AM’ variant possesses the same characteristics as standard DEL/DRIVE 50 conveyor with the additional infusion of an antimicrobial treatment. The treatment inhibits bacterial development and consequential health issues. An additional effect is the reduction of odours due to the reduction of bacterial growth.

DEL/DRIVE 50AMEM: The conveyor belt with an antimicrobial treatment and an embossed upper face.

This conveyor belt has an infused antimicrobial treatment allowing optimized hygiene levels. Its textured upper surface allows easy release of product on the belt.

DEL/DRIVE 50H: Recommended for conveyance of medium to heavy-weight loads.

Made in elastomeric polyester, DEL/DRIVE 50H conveyor belts can be used on conveying centre distances, and is the perfect selection for medium to heavy-weight loads.

It accepts higher peak temperatures and allows, in certain cases, product accumulation.

DEL/DRIVE 50EMLT: The ideal conveyor belt for frozen products.

DEL/DRIVE 50EMLT is specifically made to run in very low ambient temperatures. Its embossed upper surface facilitates the conveyance of frozen products.

DEL/DRIVE 25 conveyor belt: Positive drive on small pulley diameter.

Light and flexible, DEL/DRIVE 25 conveyor belts have a smaller pitch and a reduced thickness for smaller diameter sprockets. Del/Drive 25 reduces the size of transfer gaps and facilitates the transfer of small products.

The entire range of Mafdel positively driven belts can be equipped with cleats and sidewalls to meet different application requirements.

DEL/DRIVE conveyor belts can be installed on numerous conveyor configurations.

Positively driven conveyor belts combine the advantages of modular belts and monomaterial conveyor belts. This allows the highest levels of hygiene possible from any conveyor belt yet eliminates the risk of slippage, even in greasy and humid environments. DEL/DRIVE conveyor belts are available up to 1850mm width.

Constructed in durable polyurethane or elastomer polyester, DEL/DRIVE conveyor belts are available in pitches of both 25 and 50mm.

Available in different hardnesses, DEL/DRIVE conveyor belts can have a smooth or embossed upper surface.

Infused antimicrobial treatments are available, and some conveyor belts are resistant to very low temperatures.

Positive drive conveyor belts DEL/DRIVE are fitted without tension. This reduces stress on conveyor’s mechanical components which results in a conveyor that lasts longer.

The driving force is facilitated with sprockets mounted on square shaft or driving drum (with profiled lagging in polyurethane, or equipped with HDPE sprockets on stainless steel bushing).

Special adapters are available to accommodate different shaft diameters.

Mafdel develops a wide range of thermoweldable belts for industrial goods handling.

Its food range complies with the strictest standards and contributes to HACCP requirements.

Made of polyurethane or elastomer polyester, Mafdel’s round belts range has optimal characteristics for the food industry:

• Ease of use: Quick and efficient on-site welding, without the dismantling of the conveyors. The speed and ease of the joining procedure guarantees shorter periods of down-time.
• Maximum hygiene level: All belts of the range are rot-resistant and waterproof. Mafdel PU round belts have excellent water, oil and grease resistance. They are also available in food approved format.
• Wide range of products: The round belt range of belts can be supplied in different types that offer specific characteristics according to need. Such variations include hardness, material, reinforcement etc.
• Highly resistant: High resistance to wear and abrasion, to hydrocarbons and solvents.

Mafdel has a wide range of thermoweldable belts to meet most needs:

• Reinforced round belts:

Polyurethane round belts can be reinforced by aramid cords, and the reinforcement of polyester belts are made with polyester cords.

Reinforcement eliminates problematic belt elongation, and increases the traction force.

Reinforced round belts are particularly suitable for transfer of heavy loads or for long conveyor centres. Reinforced round belts are suitable for accumulation and full-load starts.

• Frosted round belts:

Round belts can be frosted from diameter 6 to 18mm.

Frosting decreases the friction coefficient and improves the sliding effect of the belt. Product accumulation is possible.

• Endless round belts:

Mafdel manufactures endless round belts on demand for small, medium or large series. They are particularly suitable for shaft to roller driving (live roller), or roller to roller driving.

• Tubular round belts:

Tubular round belts are an effective solution where thermowelding is not possible. A simple joining plug is supplied to join the belt and this can also be reused if necessary. This style of belt is available in various diameters.

Tubular belts are an optimal solution for frequent assembly or disassembly.

Mafdel’s technicians are available to discuss applications and propose appropriate solutions. Bespoke products can also be created subject to certain terms and conditions.

Constructed in polyurethane or elastomer polyester, round belts from Mafdel’s range are exclusively monomaterial and thermoweldable.

They can be welded on-site without dismantling, or joined with fasteners for tubular belts.

Available in different hardnesses, belts can be reinforced and/or frosted to meet the most of needs.