Characteristics: ROTARY CATTLE BOX

• Entry of the animal for a back door, type guillotine, actuated by pneumatic cylinder.
• Inside push operated by a hydraulic cylinder, with 2 movements. It falls on the back of the animal and pushes the animal forward, adapting to the size of the animal and take out the head for the bleeding hole.
• Roof window for slaughtering the animal in traditional slaughter mode.
• Trap with rotational movement 180º, powered by hydraulic motor, to invert the animal upside down.
• Front door type guillotine, with upward movement, to hold the animal's neck, operated with hydraulic cylinder.
• Grid with tilting backwards, actuated by hydraulic cylinder, to block the head on the front and separate the chin of the animal, to easily access for bleeding.
• Swing door at the side, actuated by hydraulic cylinder, for the ejection of the animal.
• Sloping floor, actuated by hydraulic cylinder, with simultaneous movement to the expulsion door, to facilitate the fall of the animal.
• System for bleeding small animals: panel at the top and panel at the side operated by a hydraulic cylinder, to reduce height and width.
• Control box, with manual buttons to operate all the movements of the machine. Incorporates a button to support when the animal is being slaughtered and, from now on, the PLC counts a certain amount of time (the workbench for the animal welfare directive of immobilization until the animal is dead) , and after this time, an acoustic signal sounds and from this moment, the box can return to its initial position.
Constructed of stainless steel AISI-304. Micro-blasted finish.

Performance :
- Ritual mode: 40-50 animals / hour (the performance can be reduced to half, depending on the time of loss of consciousness of the animal)
- Traditional mode: 60-80 animals / hour

Overall dimensions:
2480 mm length x 3300 mm width x 5500 mm height.